Ensure High Quality with a Vision Inspection System

04/06/2016
As your products go down the line, they often go through a lot of steps before the final step. However, this can often mean that there are also a lot of steps where something can get off kilter. This means that you have a few options to make sure everything is going according to plan. You can have someone physically check the part at every step, or you could have a vision inspection system installed.

Here at Micromatic, one of our specialties is automation. We’ve found that by installing cameras at critical junctures of the production process, we can help you stay on top of your assembly process easily and quickly. The cameras that we install will take a picture of the part from a variety of angles and compare it to a master image. If there are any discrepancies between the two images, the system will warn you that something is off in the process and you can address it immediately. This not only saves you time and materials, but also allows you to ensure a much higher quality of product for your customers.

Contact us today and we’ll go over all of the options available for a vision inspection system. With decades of experience under our belts, we’re sure that we can help you increase the efficiency of your production line.